Lakra Decor

Produce several brands nitroenamels different composition and purpose: coating on wood, metals, etc. Nitroemali dries quickly even at room temperature, but they are very sensitive to moisture, and if the relative humidity is over 70%, film dries may be covered with white spots. In addition, the faster you nitroemali-Tsvetayev and crack. Their adhesion to metal is low, and therefore before painting to priming. Some of the repair enamels produced in aerosol containers, in which lay the steel balls. Their purpose - to help evenly mix contained in a cylinder and enamel thinner. Before use, shake the bottle must be long until you hit the ball poslyshatsya sounds of the cylinder wall. Moreover, the agitation should be continued after this is still only a minute or two and then begin to color.

As a precaution, the jet from a tank at first sent anywhere in the side, and only then, making sure that the paint comes out of uniform jet - on the painted surface. In staining throughout the entire process should not stop the uniform motion of the hands of a balloon, drawing attention to the fact that he was at a distance of 25-30 cm from the surface and spray paint was perpendicular to it. And again, if any break in the color you should immediately blow the cylinder valve, otherwise he will score the enamel. MANUFACTURERS ENAMELS In conclusion, the enamel can be used for painting or repair not only hardware, but also furniture. In this case can be recommended alkyd, nitrocellulose and silicone enamel, such as NC-11 NC-259 and CA-174. The main producers of paints and varnishes (including enamels and) used in our country, are firms TIKKURILA PAINTS OY (Finland), CAPAROL (Germany), Marshall (Turkey) and others, as well as domestic producers' Paint Tex, "" Lakra Decor "," Optimist ". In the sale of these paints come in a ready-to-eat form. For prolonged storage, they may thicken, so they are diluted with different diluents.